Micro Fuses (Radial Type) and Fuseholders |
| |
Radial type micro fuses are non-reusable type, mounted on PCBs of the through
hole type, with their conducting parts shielded when fuses are mounted
on PCBs, facilitating electrical insulation design and high-density mounting.
Technical informations of radial type micro fuses are here
|
|
| |
|
|
|
| |
It is necessary to download Japanese font for Adobe Acrobat (or Adobe Reader) to see the PDF documents. |
|
| |
LM fuses and fuseholders |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 5.08mm for rated voltage of AC/DC48V with the transparent case the fuses can be visually checked as to whether or not they are blown, a black case is also available.
A check terminal is located on top of the fuse for checking the continuity, facilitating checking of fuse blowing using a tester.
A dedicated fuseholder allows easy replacement of any blown fuse.
The fuse can be soldered directly onto a PCB.
|
|
Principal Use
|
Applications include protection of the semiconductor devices in electronic circuits. |
Approvals
|
   |
|
|
| |
|
|
| |
DM fuses and fuseholders |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 2.5mm for rated voltage of AC/DC125V.
Compact body with terminal pitch of 2.5mm and high breaking performance of AC/DC125V.
A transparent cover allows see-through check to facilitate fuse blowing checking.
A dedicated fuseholder allows easy replacement of any blown fuse.
The fuse can be soldered directly onto a PCB.
|
|
Principal Use
|
For control circuits in machine tools, sequencers and other industrial machinery and equipment. |
Approvals
|
|
|
|
| |
|
|
| |
HM fuses and fuseholders |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 5mm for rated voltage of AC/DC250V.
Compact body with terminal pitch of 5mm and high breaking performance of AC/DC250V.
A transparent cover allows see-through check to facilitate fuse blowing checking.
A dedicated fuseholder allows easy replacement of any blown fuse.
The fuse can be soldered directly onto a PCB.
|
|
Principal Use
|
For control circuits in machine tools, sequencers and other industrial machinery and equipment. |
Approvals
|
|
|
|
| |
|
|
| |
VM fuses |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 5mm for rated voltage of AC/DC125V.
A check terminal is located on top of the fuse for checking the continuity, facilitating checking of fuse blowing using a tester. |
|
Principal Use
|
For communication equipments, industrial machinery and equipment and others. |
Approvals
|
 |
|
|
| |
|
|
| |
BE/SBE fuses |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 5mm for rated voltage of AC125V/DC63V.
This product conforms to UMF Standards (IEC 60127-4), and suits all markets.
No discrimination of fuse types by destination such as USA, Europe or Japan is needed.
BE and SBE fuses of the normal blow and time lag types are available respectively.
Fuses are packed on zigzag folding tape for automatic mounting on PCBs, greatly reducing the mounting man-hours required.
Click here for
information of UMF Standards.
|
|
Principal Use
|
Protection of AC input for power supplies, protection of communication circuits (xDSL splitters and other devices) and printer motor protection. |
Approvals
|
 [except BE fuses, SBE10, SBE13, SBE16] |
|
|
| |
|
|
| |
BE-P fuses |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 5mm for rated voltage of AC125V.
This product conforms to UMF Standards (IEC 60127-4), and suits all markets.
No discrimination of fuse types by destination such as USA, Europe or Japan is needed.
This product corresponds to potting of PCB, without any decline on breaking capacity.
Click here for
information of UMF Standards.
|
|
Principal Use
|
Household and kitchen sink (Shower Toilet, dish washer, water heater, etc). |
Approvals
|
|
|
|
| |
|
|
| |
BL/SBL fuses |
|
| |
|
|
| |
|
|
| |
BX fuses |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 7.5mm for rated voltage of AC250V.
Compact large-capacity fuses featuring a compact body and maximum rated current of 20A.
Packaged in a space about half that of conventional glass tube fuses.
|
|
Principal Use
|
Protection of AC input for power supplies such as storage system power supplies of several kW class. |
Approvals
|
|
|
|
| |
|
|
| |
SBH fuses |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 7.5mm for rated voltage of AC300V, developed for lighting inverter.
By settling rated voltage AC300V, no discrimination of fuse types by circuit voltage of eavh mode.
|
|
Principal Use
|
Lighting of housing and facility. |
Approvals
|
|
|
|
| |
|
|
| |
DCP/BDH fuses |
|
| |
Features
|
DCP and BDH fuses are DC high voltage radial type micro fuses with breaking capacities of 100A and rated voltages of DC450V.
BDH fuses are packed on zigzag folding tape for
automatic mounting on PCBs, greatly reducing the mounting man-hours required.
Click here for technical information on DC high voltage fuses.
|
|
Principal Use
|
Protection of DC high voltage circuits such as active filters and other power factor improvement circuits. |
Approvals
|
|
|
|
| |
|
|
| |
RD fuses |
|
| |
Features
|
RD fuses are radial type micro fuse with breaking capacity of 500A and rated voltage of DC76V.
Compact body 8.5mm height with terminal pitch of 7.5mm and with maximum rated current of 20A for use in low-profile modularized power supplies.
|
|
Principal Use
|
Modularized power supplies for communication and other equipment. |
Approvals
|
|
|
|
| |
|
|
| |
GU fuses |
|
| |
Features
|
Large-capacity fuses directly mounted on PCBs with rated voltage of AC250V and DC125V.
Fuses up to maximum rated current of 50A are available for direct mounting on PCBs.
Insulating cover eliminates the exposure of conducting parts of fuses when the latter are mounted on PCBs facilitating electrical insulation design.
|
|
Principal Use
|
Protection of amplifier power sources, batteries installed in UPS and the AC input of power supplies of several kW class. |
Approvals
|
|
|
|
| |
|
|
| |
SBT fuses |
|
| |
Features
|
Radial type micro fuses with terminal pitch of 7.5mm.
Conforming to the North American communication standard, the Telcordia
GR-1089, with features including high breaking performance passing a cross contact test
for AC600V and 60A and a high surge resistance performance passing an iterative surge test of Ip=100A, 10/1000us.
Click here for technical information of protection for communication circuits.
|
|
Principal Use
|
Protection of communication circuits such as xDSL line cards, xDSL splitters (central offices and private subscriber premises) and xDSL modems. |
Approvals
|
|
|
|
| |
|
|
| |
|
|
.png){kind=spacer}
